Wavlink AC1200 Extender installation

Once the Wavlink AC1200 wifi extender setup is complete, you can gradually improve your wireless network.Its practical and compact design makes installation simple. Its simplistic form also makes it simple to blend into the decor of your existing house or workplace.

With the Wavlink ac1200 wireless range New Extender Setup, you can effortlessly increase the range of your current wireless network from any location. To boost the efficiency and dependability of your current network, four antennas are arranged in a unique omnidirectional design. You are able to connect all of your devices from everywhere in your house thanks to the high-performance antennae. Also wirelessly connected to your wifi is this add-on. It consequently continuously monitors and improves the signals coming from your network.


Wavlink AC1200 Extender Setup

Following steps for setting up wavlink AC1200 Extender are :

  • A nearby power outlet should be connected to the power adapter.
  • Examine the insulation on every wire.
  • To make sure the extension is turned on, look for a steady blue light.
  • Now connect your router and extender.
  • Press the WPS buttons on your router and extender at the same time to accomplish this.
  • If you don’t link the devices in two minutes, they won’t connect.
  • Check to check if the signal LED has changed back to a solid blue state.
  • This shows that the connection between the two devices was successful.
  • The next step in setting up your Wavlink ac1200 is now available.
  • Once located, the extender will make the network stronger. Additionally, the extended and regular networks will share the same SSID and password.
  • As a result, all you need to do to proceed is log in using your current password.

Note:- if you need any help regarding your wavlink wifi extender so contact our technician or official web site that is ap.setup. 


Wavlink AC1200 WiFi Extender Setup via web browser 

Follow these instructions to connect the Wavlink AC1200 extender using a web browser:

  • A power outlet should be connected to your AC1200 wifi range extender.
  • Your extender now has to be set up to repeat.
  • Go to the WIFI settings on your tablet or laptop.
  • then find the Wavlink-N network and connect to it.
  • After establishing a connection to the extender network, open any web browser, such as Microsoft Edge, Mozilla Firefox, or Google Chrome.
  • Type wifi.wavlink.com or into the address box and press Enter.
  • The Wavlink AC1200 setup page can be viewed.
  • Connect your extender to your home network according to the on-screen instructions..


Wavlink AC1200 extender setup via wps method


The WPS button makes expanding your host network easier.

  • Verify that WPS is supported by your wireless router before beginning the procedures.
  • Press the WPS buttons on your host router and the extender within two minutes.
  • Keep a look out for the Signal LED turning solid blue, which signifies a successful WPS connection.
  • Now that everything is complete, the WI-FI repeater will automatically find the signal.
  • Keep a look out for the Signal LED turning solid blue, which signifies a successful WPS connection.


Leave a Reply

Your email address will not be published. Required fields are marked *